Description:
GEE FIX MRA-3 is a chemical release agent, specially formulated to give easy release of formwork and high quality finishes to concrete. This material has been specially Developed for use where heated moulds are in use, or where large areas of complicated shutter work are involved, and some lateral movement is expected.

Advantages:
• GEE FIX MRA-3 is suitable for use on all types of formwork.
• It is a sediment free, highly mobile liquid, which can be used in very fine sprays without Clogging the jets.
• There is no unpleasant odor, even when using a fine fog spray.
• Very economic coverage rates can be obtained without difficulty.
• MRA-3 retains its mobility at low temperatures.
• It may be applied immediately or prior to casting, treated forms may be left overnight.
• Widespread experience shows that treated forms can be exposed to weather for 14 days
• Without re-arrangement to five the usual excellent result.
• Continued use fives progressively better results on timber formwork.
• It can be sued with either gray or white cement.
• GEE FIX MRA-3 provides a quick, positive release of formwork, reducing labor costs and damage to formwork and moulds.
• It drastically reduces the incidence of blowholes, surface blemishes and staining.
• It is an effective rust inhibitor.

Typical Properties:

• Appearances: clear amber liquid
• Specific Gravity: 0.86 at 20 degree C.
• Flash Point: 76 degree C
• Freezing Point: Less than -5 degree C
  Storage life in manufacturer’s drum: 12 months from date of manufacture.
• Bulk Storage: 12 months from date of delivery.